Skip to content
Fencer Vulns
no cvss —

CVE-2026-68469 json

wifi: mwifiex: fix permanently busy scans after multiple roam iterations

published 2026-08-15 2 mo ago modified 2026-11-06 2 d ago also EUVD-2026-59091

cvss
—
not scored
cisa kev
Not listed
not in CISA's catalog
epss
0.3%
EPSS 0.3% chance of exploitation in 30 days, percentile 18%
public exploits
0
none known

Summary

In the Linux kernel, the following vulnerability has been resolved:

wifi: mwifiex: fix permanently busy scans after multiple roam iterations

In order for the firmware to sleep, the driver has to confirm a previously received sleep request. The normal sequence of evets goes like this: EVENT_SLEEP -> adapter->ps_state = PS_STATE_PRE_SLEEP -> sleep-confirm -> SLEEP -> EVENT_AWAKE -> AWAKE. Before sending the sleep-confirm command, the driver must make sure there are no commands either running or waiting to be completed.

mwifiex_ret_802_11_associate() unconditionally sets ps_state = PS_STATE_AWAKE when it processes the association command response, outside of the normal powersave management flow. If EVENT_SLEEP arrives while the association command is in flight, ps_state is PRE_SLEEP when the association command response is parsed, and the forced AWAKE overwrites it. The deferred sleep-confirm is never sent.

A subsequent scan_start command is correctly acknowledged, but the firmware doesn't generate scan_result events. The scan request never finishes, and additional requests from userspace fail with -EBUSY.

After testing on both IW412 and W8997, I could only trigger the bug on the IW412 and observed the firmwares behave differently. On the IW412 the firmware still sends EVENT_SLEEP while the authentication / association process is ongoing. A W8997 under the same conditions seems to suppress power-save for the duration of the association, so PRE_SLEEP never coincided with the association response even after extended periods of testing using the loops described below (>12hours).

On the IW412, the delay between commands that triggers an EVENT_SLEEP was empirically determined to be ~20ms. This delay can naturally occur when the driver is outputting debugging information (debug_mask = 0x00000037), in which situation the busy scans issue is repeatable while running "test 1)" as described below. If the delay between commands is less than ~20ms, the firmware stays awake and the issue was not reproducible running the same test.

The host_mlme=false path also behaves differently. In this case, the entire authentication / association transaction is executed by one command (HostCmd_CMD_802_11_ASSOCIATE), and the firmware doesn't emit EVENT_SLEEP while the command is running.

Remove the assignment so the ps_state is only manipulated in the paths that are related to powersave event handling and on the main workqueue for correct sleep confirmation.

The following loop tests were performed (with debugging output enabled): 1) force roaming between two AP's, one 5GHz and one 2.4GHz, same SSID. Use wpa_cli to trigger the roaming behavior, sleep 2s between iterations. 2) force a disconnection to AP 1 and a connection to AP 2, test scan. Use wpa_cli to trigger the connection changes, sleep 2s between iterations.

Each test ran in each device for at least 3 hours.

Patch / fix

  • Linux Linux 5.10.261, 5.15.212, 6.1.178, 6.6.145, 6.12.97, 6.18.40, 7.1.5, 7.2
  • linux Debian 12 6.1.180-1
  • linux Debian 13 6.12.100-1
  • linux Debian 14 7.1.5-1

debian advisories DEBIAN-CVE-2026-68469

  • linux Ubuntu 22.04 LTS 5.15.0-198.208
  • linux Ubuntu 24.04 LTS 6.8.0-147.147
  • linux Ubuntu 26.04 LTS 7.0.0-38.38
  • linux-aws Ubuntu 22.04 LTS 5.15.0-1117.124
  • linux-aws Ubuntu 24.04 LTS 6.8.0-1067.70
  • linux-aws Ubuntu 26.04 LTS 7.0.0-1014.14
  • linux-gcp Ubuntu 22.04 LTS 5.15.0-1118.128
  • linux-gcp Ubuntu 24.04 LTS 6.8.0-1071.79

ubuntu advisories UBUNTU-CVE-2026-68469

Ubuntu security data © Canonical Ltd., from https://github.com/canonical/ubuntu-security-notices via OSV; changed: normalised to fixed package versions per release. CC BY-SA 4.0

  • kernel-source Linux Micro 6.0 6.4.0-159998.55.1
  • kernel-default Linux Micro 6.0 6.4.0-159998.55.1
  • kernel-kvmsmall Linux Micro 6.0 6.4.0-159998.55.1
  • kernel-default-base Linux Micro 6.0 6.4.0-159998.55.1.159998.21.42
  • kernel-64kb SLE Module for Basesystem 15 SP7 6.4.0-150700.53.90.1
  • kernel-syms SLE Module for Development Tools 15 SP7 6.4.0-150700.53.90.1
  • kernel-azure SLE Module for Public Cloud 15 SP7 6.4.0-150700.53.90.1
  • kernel-source SLE Module for Development Tools 15 SP7, SLE Module for Basesystem 15 SP7 6.4.0-150700.53.90.1

suse advisories SUSE-SU-2026:24550-1SUSE-SU-2026:5091-1

Vendor advisories

What the vendors themselves say about their products: affected, fixed or not affected, and what to do.

red hat product security vex CVE-2026-68469 updated cvss 5.5

kernel: wifi: mwifiex: fix permanently busy scans after multiple roam iterations

  • Red Hat Enterprise Linux 7 perf, kernel, bpftool, kernel-rt, python-perf, kernel-kdump, +8 more Red Hat Enterprise Linux 8 perf, kernel, bpftool, kernel-rt, kernel-core, kernel-tools, +29 more Red Hat Enterprise Linux 9 rv, perf, rtla, kernel, bpftool, libperf, +83 more Red Hat Enterprise Linux 10 kernel
    affected: no fix available “Fix deferred”
  • Red Hat Enterprise Linux 6 perf, kernel, python-perf, kernel-kdump, kernel-firmware, kernel-bootwrapper, +1 more
    not affected: vulnerable code not present

Red Hat CSAF VEX © Red Hat, Inc., from https://security.access.redhat.com/data/csaf/v2/vex/; changed: reduced to product statuses and remediations. CC BY 4.0 · csaf

CISA SSVC

Exploitation
none
Automatable
no
Technical impact
partial
Assessed
2 d ago

Exploit prediction

0.26% chance of exploitation in the next 30 days, higher than 18% of all scored CVEs (FIRST EPSS, 2026-11-08).

Affected products

  • Linux Linux

Classification

Technology feeds

References

Sources

Fencer Vulns keeps one entry per vulnerability: the CVE id wins, then GHSA, and records that alias each other are merged, except that two CVEs always keep separate entries. The same data is available as JSON.