Skip to content
Fencer Vulns
high 7.8

CVE-2026-23343 json

xdp: produce a warning when calculated tailroom is negative

published 2026-03-25 7 mo ago modified 2026-11-05 3 d ago also EUVD-2026-15310

cvss
7.8
version 3.1, NVD
cisa kev
Not listed
not in CISA's catalog
epss
0.1%
EPSS 0.1% chance of exploitation in 30 days, percentile 3%
public exploits
0
none known

Summary

In the Linux kernel, the following vulnerability has been resolved:

xdp: produce a warning when calculated tailroom is negative

Many ethernet drivers report xdp Rx queue frag size as being the same as DMA write size. However, the only user of this field, namely bpf_xdp_frags_increase_tail(), clearly expects a truesize.

Such difference leads to unspecific memory corruption issues under certain circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses all DMA-writable space in 2 buffers. This would be fine, if only rxq->frag_size was properly set to 4K, but value of 3K results in a negative tailroom, because there is a non-zero page offset.

We are supposed to return -EINVAL and be done with it in such case, but due to tailroom being stored as an unsigned int, it is reported to be somewhere near UINT_MAX, resulting in a tail being grown, even if the requested offset is too much (it is around 2K in the abovementioned test). This later leads to all kinds of unspecific calltraces.

[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6 [ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4 [ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000] [ 7340.339230] in xskxceiver[42b5,400000+69000] [ 7340.340300] likely on CPU 6 (core 0, socket 6) [ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe [ 7340.340888] likely on CPU 3 (core 0, socket 3) [ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7 [ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI [ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy) [ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014 [ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80 [ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89 [ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202 [ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010 [ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff [ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0 [ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0 [ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500 [ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000 [ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0 [ 7340.421237] PKRU: 55555554 [ 7340.421623] Call Trace: [ 7340.421987] <TASK> [ 7340.422309] ? softleaf_from_pte+0x77/0xa0 [ 7340.422855] swap_pte_batch+0xa7/0x290 [ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270 [ 7340.424102] zap_pte_range+0x281/0x580 [ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240 [ 7340.425177] unmap_page_range+0x24d/0x420 [ 7340.425714] unmap_vmas+0xa1/0x180 [ 7340.426185] exit_mmap+0xe1/0x3b0 [ 7340.426644] __mmput+0x41/0x150 [ 7340.427098] exit_mm+0xb1/0x110 [ 7340.427539] do_exit+0x1b2/0x460 [ 7340.427992] do_group_exit+0x2d/0xc0 [ 7340.428477] get_signal+0x79d/0x7e0 [ 7340.428957] arch_do_signal_or_restart+0x34/0x100 [ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0 [ 7340.430159] do_syscall_64+0x188/ ---truncated---

Patch / fix

  • Linux Linux 6.1.167, 6.6.130, 6.12.77, 6.18.17, 6.19.7, 7.0
  • linux Debian 12 6.1.170-1
  • linux Debian 13 6.12.85-1
  • linux Debian 14 6.19.8-1

debian advisories DEBIAN-CVE-2026-23343

  • linux Ubuntu 24.04 LTS 6.8.0-136.136
  • linux-aws Ubuntu 24.04 LTS 6.8.0-1061.64
  • linux-gcp Ubuntu 24.04 LTS 6.8.0-1064.72
  • linux-gke Ubuntu 24.04 LTS 6.8.0-1059.67
  • linux-ibm Ubuntu 24.04 LTS 6.8.0-1061.62
  • linux-azure Ubuntu 24.04 LTS 6.8.0-1063.71
  • linux-gkeop Ubuntu 24.04 LTS 6.8.0-1046.50
  • linux-raspi Ubuntu 24.04 LTS 6.8.0-1061.65

ubuntu advisories UBUNTU-CVE-2026-23343

Ubuntu security data © Canonical Ltd., from https://github.com/canonical/ubuntu-security-notices via OSV; changed: normalised to fixed package versions per release. CC BY-SA 4.0

  • kernel-64kb SLE Module for Basesystem 15 SP7 6.4.0-150700.53.55.1
  • kernel-syms SLE Module for Development Tools 15 SP7 6.4.0-150700.53.55.1
  • kernel-azure SLE Module for Public Cloud 15 SP7 6.4.0-150700.53.55.1
  • kernel-source SLE Module for Development Tools 15 SP7, SLE Module for Basesystem 15 SP7 6.4.0-150700.53.55.1
  • kernel-default SLE Workstation Extension 15 SP7, SLE Module for Legacy 15 SP7, SLE Module for Basesystem 15 SP7 +2 more 6.4.0-150700.53.55.1
  • kernel-zfcpdump SLE Module for Basesystem 15 SP7 6.4.0-150700.53.55.1
  • kernel-obs-build SLE Module for Development Tools 15 SP7 6.4.0-150700.53.55.1
  • kernel-default-base SLE Module for Basesystem 15 SP7 6.4.0-150700.53.55.1.150700.17.33.1

suse advisories SUSE-SU-2026:2238-1SUSE-SU-2026:21237-1SUSE-SU-2026:21230-1SUSE-SU-2026:21255-1SUSE-SU-2026:21123-1SUSE-SU-2026:21114-1

  • kernel-rt openSUSE Leap 16.0 6.12.0-160000.28.1
  • dtb-aarch64 openSUSE Leap 16.0 6.12.0-160000.28.1
  • kernel-64kb openSUSE Leap 16.0 6.12.0-160000.28.1
  • kernel-syms openSUSE Leap 16.0 6.12.0-160000.28.1
  • kernel-azure openSUSE Leap 16.0 6.12.0-160000.28.1
  • kernel-obs-qa openSUSE Leap 16.0 6.12.0-160000.28.1
  • kernel-source openSUSE Leap 16.0 6.12.0-160000.28.1
  • kernel-default openSUSE Leap 16.0 6.12.0-160000.28.1

opensuse advisories openSUSE-SU-2026:20572-1

  • kernel Azure Linux 3.0 6.6.130.1-1

azure linux advisories AZL-80730

Azure Linux vulnerability data, Copyright (c) Microsoft Corporation, from https://github.com/microsoft/AzureLinuxVulnerabilityData via OSV, under the MIT licence; changed: normalised to fixed package versions per release. MIT

Vendor advisories

What the vendors themselves say about their products: affected, fixed or not affected, and what to do.

red hat product security vex CVE-2026-23343 updated cvss 5.5

kernel: xdp: produce a warning when calculated tailroom is negative

  • Red Hat Enterprise Linux 6 perf, kernel, python-perf, kernel-kdump, kernel-firmware, kernel-bootwrapper, +1 more
    affected: no fix planned “Out of support scope”
  • Red Hat Enterprise Linux 9 rv, perf, rtla, kernel, bpftool, libperf, +83 more Red Hat Enterprise Linux 10 kernel
    affected: no fix available “Fix deferred”
  • Red Hat Enterprise Linux 7 perf, kernel, bpftool, kernel-rt, python-perf, kernel-kdump, +8 more Red Hat Enterprise Linux 8 perf, kernel, bpftool, kernel-rt, kernel-core, kernel-tools, +29 more
    not affected: vulnerable code not present

Red Hat CSAF VEX © Red Hat, Inc., from https://security.access.redhat.com/data/csaf/v2/vex/; changed: reduced to product statuses and remediations. CC BY 4.0 · csaf

cisa ICSA-26-295-11 updated cvss 5.5

Siemens SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP

  • Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0) >= 3.1.7 Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0) >= 3.1.7 Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0) >= 3.1.7 Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0) >= 3.1.7 Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0) >= 3.1.7
    affected: mitigation, no fix available

Facts from CISA's republication of the vendor's own advisory (CSAF); the linked advisory is the authoritative source. CISA notification · csaf

cisa ICSA-26-295-16 updated cvss 5.5

Siemens SIMATIC S7-1500 TM MFP

  • Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem
    affected: mitigation, no fix available

Facts from CISA's republication of the vendor's own advisory (CSAF); the linked advisory is the authoritative source. CISA notification · csaf

cisa ICSA-26-209-04 updated cvss 5.5

Siemens SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP

  • Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0) >= 3.1.6 Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0) >= 3.1.6 Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0) >= 3.1.6 Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0) >= 3.1.6 Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0) >= 3.1.6
    affected: mitigation, no fix available

Facts from CISA's republication of the vendor's own advisory (CSAF); the linked advisory is the authoritative source. CISA notification · csaf

CISA SSVC

Exploitation
none
Automatable
no
Technical impact
partial
Assessed
3 d ago

Exploit prediction

0.14% chance of exploitation in the next 30 days, higher than 3% of all scored CVEs (FIRST EPSS, 2026-11-08).

CVSS scores

assigned by version score vector
NVD 3.1 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Affected products

  • Linux Linux
  • Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP
  • Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP
  • Siemens SIMATIC S7-1500 TM MFP - GNU/Linux subsystem
  • Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP

Classification

Weakness
Technology feeds

References

Sources

Fencer Vulns keeps one entry per vulnerability: the CVE id wins, then GHSA, and records that alias each other are merged, except that two CVEs always keep separate entries. The same data is available as JSON.