Skip to content
Fencer Vulns
medium 5.5

CVE-2025-37945 json

net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY

published 2025-05-20 17 mo ago modified 2026-11-05 3 d ago also EUVD-2025-15839

cvss
5.5
version 3.1, NVD
cisa kev
Not listed
not in CISA's catalog
epss
0.2%
EPSS 0.2% chance of exploitation in 30 days, percentile 11%
public exploits
0
none known

Summary

In the Linux kernel, the following vulnerability has been resolved:

net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY

DSA has 2 kinds of drivers:

1. Those who call dsa_switch_suspend() and dsa_switch_resume() from their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz 2. Those who don't: all others. The above methods should be optional.

For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(), and dsa_switch_resume() calls dsa_user_resume() -> phylink_start(). These seem good candidates for setting mac_managed_pm = true because that is essentially its definition [1], but that does not seem to be the biggest problem for now, and is not what this change focuses on.

Talking strictly about the 2nd category of DSA drivers here (which do not have MAC managed PM, meaning that for their attached PHYs, mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full), I have noticed that the following warning from mdio_bus_phy_resume() is triggered:

WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY && phydev->state != PHY_UP);

because the PHY state machine is running.

It's running as a result of a previous dsa_user_open() -> ... -> phylink_start() -> phy_start() having been initiated by the user.

The previous mdio_bus_phy_suspend() was supposed to have called phy_stop_machine(), but it didn't. So this is why the PHY is in state PHY_NOLINK by the time mdio_bus_phy_resume() runs.

mdio_bus_phy_suspend() did not call phy_stop_machine() because for phylink, the phydev->adjust_link function pointer is NULL. This seems a technicality introduced by commit fddd91016d16 ("phylib: fix PAL state machine restart on resume"). That commit was written before phylink existed, and was intended to avoid crashing with consumer drivers which don't use the PHY state machine - phylink always does, when using a PHY. But phylink itself has historically not been developed with suspend/resume in mind, and apparently not tested too much in that scenario, allowing this bug to exist unnoticed for so long. Plus, prior to the WARN_ON(), it would have likely been invisible.

This issue is not in fact restricted to type 2 DSA drivers (according to the above ad-hoc classification), but can be extrapolated to any MAC driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where the issue was reported. Assuming mac_managed_pm is set correctly, a quick search indicates the following other drivers might be affected:

$ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm drivers/net/ethernet/atheros/ag71xx.c drivers/net/ethernet/microchip/sparx5/sparx5_main.c drivers/net/ethernet/microchip/lan966x/lan966x_main.c drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c drivers/net/ethernet/freescale/dpaa/dpaa_eth.c drivers/net/ethernet/freescale/ucc_geth.c drivers/net/ethernet/freescale/enetc/enetc_pf_common.c drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c drivers/net/ethernet/marvell/mvneta.c drivers/net/ethernet/marvell/prestera/prestera_main.c drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/altera/altera_tse_main.c drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c drivers/net/ethernet/meta/fbnic/fbnic_phylink.c drivers/net/ethernet/tehuti/tn40_phy.c drivers/net/ethernet/mscc/ocelot_net.c

Make the existing conditions dependent on the PHY device having a phydev->phy_link_change() implementation equal to the default phy_link_change() provided by phylib. Otherwise, we implicitly know that the phydev has the phylink-provided phylink_phy_change() callback, and when phylink is used, the PHY state machine always needs to be stopped/ started on the suspend/resume path. The code is structured as such that if phydev->phy_link_change() is absent, it is a matter of time until the kernel will crash - no need to further complicate the test.

Thus, for the situation where the PM is not managed b ---truncated---

Patch / fix

  • Linux Linux 5.16, 5.20, 6.1.168, 6.6.122, 6.12.24, 6.13.12, 6.14.3, 6.15
  • linux Debian 12 6.1.170-1
  • linux Debian 14, Debian 13 6.12.25-1

debian advisories DEBIAN-CVE-2025-37945

  • linux Ubuntu 24.04 LTS 6.8.0-100.100
  • linux-aws Ubuntu 24.04 LTS 6.8.0-1046.49
  • linux-gcp Ubuntu 24.04 LTS 6.8.0-1047.50
  • linux-gke Ubuntu 24.04 LTS 6.8.0-1043.48
  • linux-ibm Ubuntu 24.04 LTS 6.8.0-1044.44
  • linux-azure Ubuntu 24.04 LTS 6.8.0-1046.52
  • linux-gkeop Ubuntu 24.04 LTS 6.8.0-1030.33
  • linux-raspi Ubuntu 24.04 LTS 6.8.0-1047.51

ubuntu advisories UBUNTU-CVE-2025-37945

Ubuntu security data © Canonical Ltd., from https://github.com/canonical/ubuntu-security-notices via OSV; changed: normalised to fixed package versions per release. CC BY-SA 4.0

  • kernel-coco SLE Module for Confidential Computing Technical Preview 15 SP6 6.4.0-15061.28.coco15sp6.1
  • kernel-syms-coco SLE Module for Confidential Computing Technical Preview 15 SP6 6.4.0-15061.28.coco15sp6.1
  • kernel-coco_debug SLE Module for Confidential Computing Technical Preview 15 SP6 6.4.0-15061.28.coco15sp6.1
  • kernel-source-coco SLE Module for Confidential Computing Technical Preview 15 SP6 6.4.0-15061.28.coco15sp6.1
  • dtb-aarch64 openSUSE Leap 15.6 6.4.0-150600.23.60.3
  • kernel-64kb SLE Module for Basesystem 15 SP6, openSUSE Leap 15.6 6.4.0-150600.23.60.4
  • kernel-syms SLE Module for Development Tools 15 SP6, openSUSE Leap 15.6 6.4.0-150600.23.60.4
  • kernel-obs-qa openSUSE Leap 15.6 6.4.0-150600.23.60.2

suse advisories SUSE-SU-2025:02923-1SUSE-SU-2025:02538-1SUSE-SU-2025:20498-1SUSE-SU-2025:20483-1SUSE-SU-2025:02335-1SUSE-SU-2025:02333-1

  • kernel Azure Linux 3.0 6.6.126.1-1

azure linux advisories AZL-70346

Azure Linux vulnerability data, Copyright (c) Microsoft Corporation, from https://github.com/microsoft/AzureLinuxVulnerabilityData via OSV, under the MIT licence; changed: normalised to fixed package versions per release. MIT

Vendor advisories

What the vendors themselves say about their products: affected, fixed or not affected, and what to do.

red hat product security vex CVE-2025-37945 updated cvss 2.5

kernel: net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY

  • Red Hat Enterprise Linux 6 perf, kernel, python-perf, kernel-kdump, kernel-firmware, kernel-bootwrapper, +1 more
    affected: no fix planned “Out of support scope”
  • Red Hat Enterprise Linux 9 rv, perf, rtla, kernel, bpftool, libperf, +83 more Red Hat Enterprise Linux 10 kernel
    affected: no fix available
  • Red Hat Enterprise Linux 7 perf, kernel, bpftool, kernel-rt, python-perf, kernel-kdump, +8 more Red Hat Enterprise Linux 8 perf, kernel, bpftool, kernel-rt, kernel-core, kernel-tools, +29 more
    not affected: vulnerable code not present

Red Hat CSAF VEX © Red Hat, Inc., from https://security.access.redhat.com/data/csaf/v2/vex/; changed: reduced to product statuses and remediations. CC BY 4.0 · csaf

cisa ICSA-26-295-11 updated cvss 5.5

Siemens SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP

  • Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0) >= 3.1.7 Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0) >= 3.1.7 Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0) >= 3.1.7 Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0) >= 3.1.7 Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0) >= 3.1.7
    affected: mitigation, no fix available

Facts from CISA's republication of the vendor's own advisory (CSAF); the linked advisory is the authoritative source. CISA notification · csaf

cisa ICSA-26-209-04 updated cvss 5.5

Siemens SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP

  • Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0) >= 3.1.6 Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AC0) >= 3.1.6 Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AB0) >= 3.1.6 Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP (6ES7518-4FX00-1AC0) >= 3.1.6 Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP (6AG1518-4AX00-4AC0) >= 3.1.6
    affected: mitigation, no fix available

Facts from CISA's republication of the vendor's own advisory (CSAF); the linked advisory is the authoritative source. CISA notification · csaf

CISA SSVC

Exploitation
none
Automatable
no
Technical impact
partial
Assessed
3 d ago

Exploit prediction

0.21% chance of exploitation in the next 30 days, higher than 11% of all scored CVEs (FIRST EPSS, 2026-11-08).

CVSS scores

assigned by version score vector
NVD 3.1 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Affected products

  • Linux Linux
  • Siemens SIMATIC S7-1500 CPU 1518-4 PN/DP MFP
  • Siemens SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP
  • Siemens SIPLUS S7-1500 CPU 1518-4 PN/DP MFP

Classification

Weakness
Technology feeds

References

Sources

Fencer Vulns keeps one entry per vulnerability: the CVE id wins, then GHSA, and records that alias each other are merged, except that two CVEs always keep separate entries. The same data is available as JSON.