Skip to content
Fencer Vulns
high 7.8

CVE-2024-26802 json

stmmac: Clear variable when destroying workqueue

published 2024-04-04 2 y ago modified 2026-08-05 3 mo ago also EUVD-2024-24064

cvss
7.8
version 3.1, CNA
cisa kev
Not listed
not in CISA's catalog
epss
0.2%
EPSS 0.2% chance of exploitation in 30 days, percentile 14%
public exploits
0
none known

Summary

In the Linux kernel, the following vulnerability has been resolved:

stmmac: Clear variable when destroying workqueue

Currently when suspending driver and stopping workqueue it is checked whether workqueue is not NULL and if so, it is destroyed. Function destroy_workqueue() does drain queue and does clear variable, but it does not set workqueue variable to NULL. This can cause kernel/module panic if code attempts to clear workqueue that was not initialized.

This scenario is possible when resuming suspended driver in stmmac_resume(), because there is no handling for failed stmmac_hw_setup(), which can fail and return if DMA engine has failed to initialize, and workqueue is initialized after DMA engine. Should DMA engine fail to initialize, resume will proceed normally, but interface won't work and TX queue will eventually timeout, causing 'Reset adapter' error. This then does destroy workqueue during reset process. And since workqueue is initialized after DMA engine and can be skipped, it will cause kernel/module panic.

To secure against this possible crash, set workqueue variable to NULL when destroying workqueue.

Log/backtrace from crash goes as follows: [88.031977]------------[ cut here ]------------ [88.031985]NETDEV WATCHDOG: eth0 (sxgmac): transmit queue 1 timed out [88.032017]WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:477 dev_watchdog+0x390/0x398 <Skipping backtrace for watchdog timeout> [88.032251]---[ end trace e70de432e4d5c2c0 ]--- [88.032282]sxgmac 16d88000.ethernet eth0: Reset adapter. [88.036359]------------[ cut here ]------------ [88.036519]Call trace: [88.036523] flush_workqueue+0x3e4/0x430 [88.036528] drain_workqueue+0xc4/0x160 [88.036533] destroy_workqueue+0x40/0x270 [88.036537] stmmac_fpe_stop_wq+0x4c/0x70 [88.036541] stmmac_release+0x278/0x280 [88.036546] __dev_close_many+0xcc/0x158 [88.036551] dev_close_many+0xbc/0x190 [88.036555] dev_close.part.0+0x70/0xc0 [88.036560] dev_close+0x24/0x30 [88.036564] stmmac_service_task+0x110/0x140 [88.036569] process_one_work+0x1d8/0x4a0 [88.036573] worker_thread+0x54/0x408 [88.036578] kthread+0x164/0x170 [88.036583] ret_from_fork+0x10/0x20 [88.036588]---[ end trace e70de432e4d5c2c1 ]--- [88.036597]Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004

Patch / fix

  • Linux Linux 5.15.151, 6.1.81, 6.6.21, 6.7.9, 6.8
  • linux Debian 12 6.1.82-1
  • linux Debian 14, Debian 13 6.7.9-1

debian advisories DEBIAN-CVE-2024-26802

  • linux Ubuntu 22.04 LTS 5.15.0-112.122
  • linux-aws Ubuntu 22.04 LTS 5.15.0-1063.69
  • linux-gcp Ubuntu 22.04 LTS 5.15.0-1062.70
  • linux-gke Ubuntu 22.04 LTS 5.15.0-1060.66
  • linux-ibm Ubuntu 22.04 LTS 5.15.0-1056.59
  • linux-kvm Ubuntu 22.04 LTS 5.15.0-1060.65
  • linux-azure Ubuntu 22.04 LTS 5.15.0-1066.75
  • linux-gkeop Ubuntu 22.04 LTS 5.15.0-1046.53

ubuntu advisories UBUNTU-CVE-2024-26802

Ubuntu security data © Canonical Ltd., from https://github.com/canonical/ubuntu-security-notices via OSV; changed: normalised to fixed package versions per release. CC BY-SA 4.0

  • kernel-rt RHEL 8 4.18.0-553.16.1.rt7.357.el8_10
  • kernel-rt-kvm RHEL 8 4.18.0-553.16.1.rt7.357.el8_10
  • kernel-rt-core RHEL 8 4.18.0-553.16.1.rt7.357.el8_10
  • kernel-rt-modules RHEL 8 4.18.0-553.16.1.rt7.357.el8_10
  • kernel-rt-debug-kvm RHEL 8 4.18.0-553.16.1.rt7.357.el8_10
  • kernel-rt-debug-core RHEL 8 4.18.0-553.16.1.rt7.357.el8_10
  • kernel-rt-debug-modules RHEL 8 4.18.0-553.16.1.rt7.357.el8_10
  • kernel-rt-modules-extra RHEL 8 4.18.0-553.16.1.rt7.357.el8_10

red hat advisories RHSA-2024:5102RHSA-2024:5101

  • kernel-source Linux Micro 6.0 6.4.0-18.1
  • kernel-default Linux Micro 6.0 6.4.0-18.1
  • kernel-kvmsmall Linux Micro 6.0 6.4.0-18.1
  • kernel-default-base Linux Micro 6.0 6.4.0-17.1.1.51
  • kernel-rt Real Time Module 15 SP6, openSUSE Leap 15.6 6.4.0-150600.10.5.1
  • kernel-syms-rt Real Time Module 15 SP6, openSUSE Leap 15.6 6.4.0-150600.10.5.1
  • kernel-rt_debug Real Time Module 15 SP6, openSUSE Leap 15.6 6.4.0-150600.10.5.1
  • kernel-source-rt Real Time Module 15 SP6, openSUSE Leap 15.6 6.4.0-150600.10.5.1

suse advisories SUSE-SU-2025:20008-1SUSE-SU-2024:2973-1SUSE-SU-2024:2947-1SUSE-SU-2024:2939-1SUSE-SU-2024:2894-1SUSE-SU-2024:2203-1

  • kernel AlmaLinux 8 4.18.0-553.16.1.el8_10
  • perf AlmaLinux 8 4.18.0-553.16.1.el8_10
  • bpftool AlmaLinux 8 4.18.0-553.16.1.el8_10
  • kernel-core AlmaLinux 8 4.18.0-553.16.1.el8_10
  • kernel-tools AlmaLinux 8 4.18.0-553.16.1.el8_10
  • python3-perf AlmaLinux 8 4.18.0-553.16.1.el8_10
  • kernel-modules AlmaLinux 8 4.18.0-553.16.1.el8_10
  • kernel-zfcpdump AlmaLinux 8 4.18.0-553.16.1.el8_10

almalinux advisories ALSA-2024:5101ALSA-2024:5102

  • kernel Rocky Linux 8 4.18.0-553.16.1.el8_10.cloud.0.1
  • kernel-rt Rocky Linux 8 4.18.0-553.16.1.rt7.357.el8_10
  • kernel Rocky Linux 8 4.18.0-553.16.1.el8_10

rocky linux advisories RXSA-2024:5101RLSA-2024:5102RLSA-2024:5101

Vendor advisories

What the vendors themselves say about their products: affected, fixed or not affected, and what to do.

red hat product security vex CVE-2024-26802 updated cvss 5.5

kernel: stmmac: Clear variable when destroying workqueue

  • Red Hat Enterprise Linux BaseOS (v. 8) perf 4.18.0-553.16.1.el8_10, kernel 4.18.0-553.16.1.el8_10, bpftool 4.18.0-553.16.1.el8_10, kernel-core 4.18.0-553.16.1.el8_10, kernel-tools 4.18.0-553.16.1.el8_10, python3-perf 4.18.0-553.16.1.el8_10, +15 more Red Hat Enterprise Linux CRB (v. 8) kernel-debuginfo-common-x86_64 4.18.0-553.16.1.el8_10, kernel-debuginfo-common-aarch64 4.18.0-553.16.1.el8_10, kernel-debuginfo-common-ppc64le 4.18.0-553.16.1.el8_10
    fixed: vendor fix RHSA-2024:5101
  • Red Hat Enterprise Linux NFV (v. 8) kernel-rt 4.18.0-553.16.1.rt7.357.el8_10, kernel-rt-kvm 4.18.0-553.16.1.rt7.357.el8_10, kernel-rt-core 4.18.0-553.16.1.rt7.357.el8_10, kernel-rt-modules 4.18.0-553.16.1.rt7.357.el8_10, kernel-rt-debug-kvm 4.18.0-553.16.1.rt7.357.el8_10, kernel-rt-debug-core 4.18.0-553.16.1.rt7.357.el8_10, +4 more Red Hat Enterprise Linux RT (v. 8) kernel-rt 4.18.0-553.16.1.rt7.357.el8_10, kernel-rt-core 4.18.0-553.16.1.rt7.357.el8_10, kernel-rt-modules 4.18.0-553.16.1.rt7.357.el8_10, kernel-rt-debug-core 4.18.0-553.16.1.rt7.357.el8_10, kernel-rt-debug-modules 4.18.0-553.16.1.rt7.357.el8_10, kernel-rt-modules-extra 4.18.0-553.16.1.rt7.357.el8_10, +2 more
    fixed: vendor fix RHSA-2024:5102
  • Red Hat Enterprise Linux 6 perf, kernel, python-perf, kernel-kdump, kernel-firmware, kernel-bootwrapper, +1 more Red Hat Enterprise Linux 7 perf, kernel, bpftool, kernel-rt, python-perf, kernel-kdump, +8 more Red Hat Enterprise Linux 9 rv, perf, rtla, kernel, bpftool, libperf, +83 more
    not affected: vulnerable code not present

Red Hat CSAF VEX © Red Hat, Inc., from https://security.access.redhat.com/data/csaf/v2/vex/; changed: reduced to product statuses and remediations. CC BY 4.0 · csaf

CISA SSVC

Exploitation
none
Automatable
no
Technical impact
partial
Assessed
2 y ago

Exploit prediction

0.24% chance of exploitation in the next 30 days, higher than 14% of all scored CVEs (FIRST EPSS, 2026-11-08).

CVSS scores

assigned by version score vector
CNA 3.1 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
NVD 3.1 5.5 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Affected products

  • Linux Linux

Classification

Weakness
Technology feeds

References

Sources

Fencer Vulns keeps one entry per vulnerability: the CVE id wins, then GHSA, and records that alias each other are merged, except that two CVEs always keep separate entries. The same data is available as JSON.