Skip to content
Fencer Vulns
high 7.8

CVE-2023-52934 json

mm/MADV_COLLAPSE: catch !none !huge !bad pmd lookups

published 2025-03-27 19 mo ago modified 2026-08-05 3 mo ago also EUVD-2023-59756

cvss
7.8
version 3.1, CNA
cisa kev
Not listed
not in CISA's catalog
epss
0.1%
EPSS 0.1% chance of exploitation in 30 days, percentile 2%
public exploits
0
none known

Summary

In the Linux kernel, the following vulnerability has been resolved:

mm/MADV_COLLAPSE: catch !none !huge !bad pmd lookups

In commit 34488399fa08 ("mm/madvise: add file and shmem support to MADV_COLLAPSE") we make the following change to find_pmd_or_thp_or_none():

- if (!pmd_present(pmde)) - return SCAN_PMD_NULL; + if (pmd_none(pmde)) + return SCAN_PMD_NONE;

This was for-use by MADV_COLLAPSE file/shmem codepaths, where MADV_COLLAPSE might identify a pte-mapped hugepage, only to have khugepaged race-in, free the pte table, and clear the pmd. Such codepaths include:

A) If we find a suitably-aligned compound page of order HPAGE_PMD_ORDER already in the pagecache. B) In retract_page_tables(), if we fail to grab mmap_lock for the target mm/address.

In these cases, collapse_pte_mapped_thp() really does expect a none (not just !present) pmd, and we want to suitably identify that case separate from the case where no pmd is found, or it's a bad-pmd (of course, many things could happen once we drop mmap_lock, and the pmd could plausibly undergo multiple transitions due to intervening fault, split, etc). Regardless, the code is prepared install a huge-pmd only when the existing pmd entry is either a genuine pte-table-mapping-pmd, or the none-pmd.

However, the commit introduces a logical hole; namely, that we've allowed !none- && !huge- && !bad-pmds to be classified as genuine pte-table-mapping-pmds. One such example that could leak through are swap entries. The pmd values aren't checked again before use in pte_offset_map_lock(), which is expecting nothing less than a genuine pte-table-mapping-pmd.

We want to put back the !pmd_present() check (below the pmd_none() check), but need to be careful to deal with subtleties in pmd transitions and treatments by various arch.

The issue is that __split_huge_pmd_locked() temporarily clears the present bit (or otherwise marks the entry as invalid), but pmd_present() and pmd_trans_huge() still need to return true while the pmd is in this transitory state. For example, x86's pmd_present() also checks the _PAGE_PSE , riscv's version also checks the _PAGE_LEAF bit, and arm64 also checks a PMD_PRESENT_INVALID bit.

Covering all 4 cases for x86 (all checks done on the same pmd value):

1) pmd_present() && pmd_trans_huge() All we actually know here is that the PSE bit is set. Either: a) We aren't racing with __split_huge_page(), and PRESENT or PROTNONE is set. => huge-pmd b) We are currently racing with __split_huge_page(). The danger here is that we proceed as-if we have a huge-pmd, but really we are looking at a pte-mapping-pmd. So, what is the risk of this danger?

The only relevant path is:

madvise_collapse() -> collapse_pte_mapped_thp()

Where we might just incorrectly report back "success", when really the memory isn't pmd-backed. This is fine, since split could happen immediately after (actually) successful madvise_collapse(). So, it should be safe to just assume huge-pmd here.

2) pmd_present() && !pmd_trans_huge() Either: a) PSE not set and either PRESENT or PROTNONE is. => pte-table-mapping pmd (or PROT_NONE) b) devmap. This routine can be called immediately after unlocking/locking mmap_lock -- or called with no locks held (see khugepaged_scan_mm_slot()), so previous VMA checks have since been invalidated.

3) !pmd_present() && pmd_trans_huge() Not possible.

4) !pmd_present() && !pmd_trans_huge() Neither PRESENT nor PROTNONE set => not present

I've checked all archs that implement pmd_trans_huge() (arm64, riscv, powerpc, longarch, x86, mips, s390) and this logic roughly translates (though devmap treatment is unique to x86 and powerpc, and (3) doesn't necessarily hold in general -- but that doesn't matter since !pmd_present() always takes failure path).

Also, add a comment above find_pmd_or_thp_or_none() ---truncated---

Patch / fix

  • Linux Linux 6.1.11, 6.2
  • linux Debian 14, Debian 13, Debian 12 6.1.11-1

debian advisories DEBIAN-CVE-2023-52934

  • kernel RHEL 9 5.14.0-427.13.1.el9_4
  • rv RHEL 9 5.14.0-427.13.1.el9_4
  • perf RHEL 9 5.14.0-427.13.1.el9_4
  • rtla RHEL 9 5.14.0-427.13.1.el9_4
  • bpftool RHEL 9 7.3.0-427.13.1.el9_4
  • libperf RHEL 9 5.14.0-427.13.1.el9_4
  • kernel-rt RHEL 9 5.14.0-427.13.1.el9_4
  • kernel-64k RHEL 9 5.14.0-427.13.1.el9_4

red hat advisories RHSA-2024:2394

Vendor advisories

What the vendors themselves say about their products: affected, fixed or not affected, and what to do.

red hat product security vex CVE-2023-52934 updated cvss 4.7

kernel: mm/MADV_COLLAPSE: catch !none !huge !bad pmd lookups

  • Red Hat Enterprise Linux 9 kernel-rt, kernel-rt-kvm, kernel-rt-core, kernel-rt-modules, kernel-rt-debug-kvm, kernel-rt-debug-core, +12 more
    affected: no fix available “Fix deferred”
  • Red Hat Enterprise Linux AppStream (v. 9) rv 5.14.0-427.13.1.el9_4, perf 5.14.0-427.13.1.el9_4, rtla 5.14.0-427.13.1.el9_4, kernel-devel-matched 5.14.0-427.13.1.el9_4, kernel-64k-devel-matched 5.14.0-427.13.1.el9_4, kernel-debug-devel-matched 5.14.0-427.13.1.el9_4, +6 more Red Hat Enterprise Linux BaseOS (v. 9) bpftool 7.3.0-427.13.1.el9_4, kernel 5.14.0-427.13.1.el9_4, kernel-64k 5.14.0-427.13.1.el9_4, kernel-core 5.14.0-427.13.1.el9_4, kernel-tools 5.14.0-427.13.1.el9_4, python3-perf 5.14.0-427.13.1.el9_4, +28 more Red Hat Enterprise Linux CRB (v. 9) libperf 5.14.0-427.13.1.el9_4, kernel-debuginfo-common-s390x 5.14.0-427.13.1.el9_4, kernel-debuginfo-common-x86_64 5.14.0-427.13.1.el9_4, kernel-debuginfo-common-aarch64 5.14.0-427.13.1.el9_4, kernel-debuginfo-common-ppc64le 5.14.0-427.13.1.el9_4 Red Hat Enterprise Linux NFV (v. 9) kernel-rt 5.14.0-427.13.1.el9_4, kernel-rt-kvm 5.14.0-427.13.1.el9_4, kernel-rt-core 5.14.0-427.13.1.el9_4, kernel-rt-modules 5.14.0-427.13.1.el9_4, kernel-rt-debug-kvm 5.14.0-427.13.1.el9_4, kernel-rt-debug-core 5.14.0-427.13.1.el9_4, +6 more Red Hat Enterprise Linux RT (v. 9) kernel-rt 5.14.0-427.13.1.el9_4, kernel-rt-core 5.14.0-427.13.1.el9_4, kernel-rt-modules 5.14.0-427.13.1.el9_4, kernel-rt-debug-core 5.14.0-427.13.1.el9_4, kernel-rt-modules-core 5.14.0-427.13.1.el9_4, kernel-rt-debug-modules 5.14.0-427.13.1.el9_4, +4 more
    fixed: vendor fix RHSA-2024:2394
  • Red Hat Enterprise Linux 6 perf, kernel, python-perf, kernel-kdump, kernel-firmware, kernel-bootwrapper, +1 more Red Hat Enterprise Linux 7 perf, kernel, bpftool, kernel-rt, python-perf, kernel-kdump, +8 more Red Hat Enterprise Linux 8 perf, kernel, bpftool, kernel-rt, kernel-core, kernel-tools, +29 more Red Hat Enterprise Linux 10 kernel
    not affected: vulnerable code not present

Red Hat CSAF VEX © Red Hat, Inc., from https://security.access.redhat.com/data/csaf/v2/vex/; changed: reduced to product statuses and remediations. CC BY 4.0 · csaf

Exploit prediction

0.12% chance of exploitation in the next 30 days, higher than 2% of all scored CVEs (FIRST EPSS, 2026-11-08).

CVSS scores

assigned by version score vector
CNA 3.1 7.8 CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
NVD 3.1 4.7 CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

Affected products

  • Linux Linux

Classification

Weakness
  • CWE-362 Concurrent Execution using Shared Resource with Improper Synchronization
Technology feeds

References

Sources

Fencer Vulns keeps one entry per vulnerability: the CVE id wins, then GHSA, and records that alias each other are merged, except that two CVEs always keep separate entries. The same data is available as JSON.